Vent Systems 10 Inch Backdraft Damper - Galvanized Steel Duct Connector for One-Way Airflow - Inline Fan Vent Deflector - HVAC Ducting Connector with Backflow Shutters

VENT SYSTEMS is a company with a long tradition and experience. We provide innovative solutions in the field of ventilation of premises. We are constantly striving to develop and deliver even better, more advanced and more efficient technologies that would enable our customers to enjoy healthy fresh air indoors. All products undergo thorough quality control before going on sale. We also guarantee professional service and periodic maintenance system for maintaining system reliability for many years. We have created the value of the VENT SYSTEMS brand by putting particular emphasis on

• INSERTS INTO 10 INCH DUCTS - Back draft damper for insertion into 10 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
• A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel
• Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS hvac parts.
• Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
• The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.