Left&Right Handed Thread Lag Screws for 1/8" Decking Cable Railing Kit/Hardware, Non-Turnbuckle System (10, Black, 1/8")

Notice:1、Please stretch the cable tight before you measure and cut it(hanging heavy objects to tighten the cable is one of the method);2、Before you connect cable with the screw lags by hydraulic crimper，please make sure the end of cable is inserted into the bottom of lag’s tube;3、Make sure the hole is perpendicular to the wood post When you install a horizontal railing; 4、Please turn the R&L handed screw lags into the holes which you have drilled on the both sides of the wood posts at the same time.We must recognize that in any case we will pursue a concise railing project system，because it is beautiful、easy to install and maintain. In addition ，it is a simple structure with less problem to happen.

• This is Non-Turnbuckle System according to principle of screwing L&R handed thread lag at the same direction and the both lags will go into the opposite direction，So the cable will be tightened by the R&L handed thread lags without torsion force and damage; The length of cable spanning capability of this kit is the same as other common cable railing kits；
• This cable railing hardware was made of Marin Grade T316-Stainless Steel, and it can be used indoor and outdoor;
• The total length of this lag is 4.1 inch，Length of thread bar is 2 inch，this cable railing lag fit standard 1/8 inch（3.2mm）steel wire rope；and the length of cable is 1 inch shorter than the distance of inner edges of posts which on both sides usually to be recommended；
• This Right&Left hand thread screw lags are connected with cable need by using hydraulic crimper(This item not include)，and this item go with a correct size dill bit and a special wrench;
• When you really understand this non-turnbuckle system，you will find the swage turnbuckles and other trivial parts are not necessary in cable railing system，And this system will be more durable and beautiful.