EDC V2 Threadless Carrier

A Threadless, no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube. EDC Tool sold separately.

FEATURES:

• The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool.
• Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.)  The tire plug and bacon strips fit within the small storage capsule.
• Chain pliers are not compatible with the threadless carrier set up.
• The EDC Threadless carrier does NOT support the CO2 cartridge carrier feature on the EDC Tool 
• The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)
• Color: Black

ENSURE YOUR FORK IS COMPATIBLE - VERY IMPORTANT

Incompatible forks:

• Fox 38 with Oval steerer (Use EDC Threaded Top Cap)
• Fox E-bike specific Forks
• Rock Shox 35 Forks
• Rock Shox Judy Forks
• Rock Shox eMTB Domain forks
• Giant Overdrive 2 Forks
• Cannondale Lefty Forks
• Carbon Steerers

 STEERER TUBE LENGTH:

Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.

• Fox except Fox 38 with oval steerer = 190mm min
• RockShox Forks  = 220mm min
• All other compatible forks = 190mm min

*Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.*