Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wooden Case & POU1/2NPTW/DRILL 1/2" Carbon Steel NPT Pipe Tap and 23/32" High Speed Steel Drill Bit Set

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wooden Case6 Piece Carbon Steel NPT Pipe Tap Set with Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads Also called 'pipe taps', National pipe taper taps are appropriate for Threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the Tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. Not threads require the use of a “sealer” like Teflon tape or pipe compound.Drill America - POU1/2NPTW/DRILL 1/2" Carbon Steel NPT Pipe Tap and 23/32" High Speed Steel Drill Bit Set, POU Series1/2" Carbon Steel NPT Tap and 23/32" HSS Drill Bit Set, 1/2" NPTTap information: Drill America dwtpt Series Qualtech carbon steel pipe Tap is designed to clean and/or re-thread damaged or jam pipe threads. It is appropriate for Threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the Tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. Npt threads require the use of a sealer like Teflon tape or pipe compound. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in Shallow cuts. Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction. Drill bit information: Drill America dwdn Series high speed drill bit is a dependable, general purpose drill designed to perform in a broad range of materials in the iron and steel families. Ideal for production, maintenance or portable drilling jobs. Surface treated with abrasion-resistant black oxide. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that Act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of tool holding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

• Product 1: Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
• Product 1: Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
• Product 1: The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
• Product 1: The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
• Product 2: Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads
• Product 2: Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
• Product 2: 1/2" carbon steel NPT tap and 23/32" HSS drill bit with 1/2" Shank
• Product 2: Set comes in plastic pouch