California Heat 12V Heated Apparel 33" Battery Harness

<font face="arial"><p></p><center></center><p></p><p>Brand new, California Heat BATTERY HARNESS.</p><p>The Battery Harness is used to power your heated gear. It connects to any 12V battery for use on motorcycles, ATV’s, snow mobiles, etc. The battery harness has an inline fuse holder on the positive (red) lead, with a 15 amp fuse included. With a 38” length, there’s ample enough wire for an easy install. To calculate your true amp draw divide the amp draw on all items you are going to hook up by 12 them multiply by your motorcycle volt output. Gloves pull 2.4 amps Socks pull 2.2 amps Jacket pulls 6.4 amps Pants pull 4.6 amps Connect the red lead to the positive terminal on your battery and the black lead to the negative. Zip tie the coax plug, leaving about 6” of slack, under your seat on the left side. You may also plug the battery harness into a panel mount port (sold separately).</p><p>SKU# 472-5047</p><p></p><p>Fits:</p><p>Please verify your own fitment before purchase.</p></font>

• This battery harness has an inline fuse holder on the positive (red) lead. The fuses that are included are Violet for 3 amp, Peach for 5 amp, Brown for 7.5 amp, Red for 10 amp and Blue for 15 amp, Yellow for 20 amp. The battery harness is 38" long for an easy install. The amp draw below is rated at 12 volts. The output on your motorcycle will be between 13.8 and 14.2 volts. To calculate your true amp draw divide the amp draw on all items you are going to hook up by 12 them multiply by your motorcycle volt output. Instructions Included to Select Correct Fuse. Example: gloves 2.4 plus jacket 6.4 = 8.8 / 12 = .7333 x 14 = 10.99. You need to use the next higher rated fuse (blue for 15 amp).
• Gloves pull 2.4 amps
• Socks pull 2.2 amps
• Jacket pulls 6.4 amps
• Pants pull 4.6 amps
• Connect the red lead to the positive terminal on your battery and the black lead to the negative. Zip tie the coax plug, leaving about 6" of slack, under your seat on the left side. You may also plug the battery harness into a panel mount port (sold separately)