5.6FT Jumper Cables with Alligator Clips for Milwaukee M18 18V Batteries,Jumper Cable Clamps with Adapter Silicone Wire 8AWG Automotive Booster Cables for Jump Starting Car Using Tool Battery

newly battery jumper cables Unlike traditional jumper cables, you must rely on another car to provide the power, which can be inconvenient and time-consuming, especially in remote locations or during emergencies, The Battery Jumper Starter feature a compact and lightweight design that makes it easy to store in your vehicle, ensuring that it's always readily available without taking up significant space. AWG Standard: 8 AWG Voltage: 600 V Safety current: 33 A Copper area: 8.25 mm Resistance: 0.628 ohm/1000 ft Operate：① Connect the red battery clip of the jumper cable to the positive (+) of the vehicle and the black battery clip to the negative (-); ②-Plug the jumper into the jumper starter socket; ③ Start the vehicle and remove the clips.Remove the product from the vehicle within 30 seconds after the vehicle is started.

• Car jump starter is compatible with all milwaukee M18 batteries (Notice:Battery not included)。It's a breeze to use：simply align the power adapter into the groove, push the converter, and ensure it's locked onto the battery。battery jump starter is lightweight and easy to store in the car, ready for use at any time. No need to rely on another vehicle for power, which simplifies the jump starting process.
• The Jumper Starter features an 8-AWG, 5.6ft (approximately 1.7 m) wire,for jump starting a dead or weak battery， It operates within a voltage range of 12-24 volts, This is designed to handle a 12-24V voltage range, Ideal for trucks, SUVs, full-size cars, mid-size cars and small/compact cars。
• Jumper Cables surface is made with premium PVC which is resistant to freezing, cracking & folding and won’t tangle.built to withstand the rigors of frequent use. Each jumper clamp has undergone rigorous testing ，The non-conducting rubber and dual-grip design ensure superior conductivity and maintain secure tension.which is exhibiting excellent performance under extreme temperature conditions (-40 ° F to 140 ° F)。
• Important Safety Notes: Do not reverse the operational sequence of the emergency starter. Handle the product with care and avoid overloading it. Check your device's power requirements before use. Ensure that the power source you purchase is compatible with your vehicle, as the jumper cables will not convert or step down the voltage
• Operate：① Connect the red battery clip of the jumper cable to the positive (+) of the vehicle and the black battery clip to the negative (-); ②-Plug the jumper into the jumper starter socket; ③ Start the vehicle and remove the clips.Remove the product from the vehicle within 30 seconds after the vehicle is started.