10383321 Hazard Warning and Turn Signal Flasher, LED Flasher Compatible with Chevy Silverado & GMC Sierra Trucks 2003 2004 2005 2006 2007 Select Models, Fix Hyper Flash, 15764135, for GMT800 Platform

A MUST HAVE ITEM, If You Want Upgrading Stock Bulb or Bulb to LED or for Your Exist LED Tail Lamps of Turn Signal lights. Ref OE # for 10383321, 15764135, 10383320, 15231201, LM487, EFL-27 Specifications: 1. 10 Pins flashers LED turn signal/hazard warn hyper flash flasher relay; 2. Operating Voltage: 9-16V; 3. Operating Temperature: -40C to 85C (-40F to 185F); 3. Connector(s): Factory-Size Plug and Play. Features: 1. Compatible with all LED bulb or all incandescent bulb or combination; 2. Prevents hyperflash errors, Stop hyperflash; 3. Simple swap for original module, Direct fitment and proper sizing for your vehicle. Compatible Vehicles: [Only Fits for GMT800/880 Platform Trucks] Fits for 2003 2004 2005 2006 Silverado (1500,1500 HD,2500 HD,3500 models) & 2007 Silverado (1500 Classic,1500HD Classic,2500HD Classic,3500 Classic models) Fits for 2003 2004 2005 2006 Sierra (1500,1500 HD,2500 HD,3500 models) & 2007 Sierra (1500 Classic,1500HD Classic,2500HD Classic,3500 Classic models) br> (Notice: Some Late 06 models were sold as 07's and are referred to as the 07 Classic so as not to be confused with the New GMT900 Series)

• DIRECT REPLACEMENT - Flasher Relay Ref OE 10383321, 15764135, 10383320, 15231201, LM487, EFL-27.
• PLUG AND PLAY - Save Dollar$$$, Fits for Select GM Trucks and Work to replace 2003 2004 2005 2006 2007 GMT800 Platform Trucks Factory Flasher Module (10-Pins).
• STOP HYPER FLASH - Fix Hyper Flash for Hazard Warning and Turn Signal. Fits for LED bulb or incandescent bulb or Combination.
• SPECIAL VEHICLES - 10383321 LED Flasher Only for the GMT800 (and GMT880) Basic Platform. Fits for 2003 2004 2005 2006 Silverado / Sierra (1500, 1500 HD, 2500 HD, 3500 Models) & 2007 Silverado / Sierra (1500 Classic, 1500HD Classic, 2500HD Classic, 3500 Classic Models). (Notice: Some Late 06 models were sold as 07's and are referred to as the 07 Classic so as not to be confused with the New GMT900 Series). Please check factory module, If have a 10 pin flasher module it should work.
• NOTICE - Tip, Could Use Plastic Trim Panel Tool to Pry/Wiggle it out. There isn't much Room to Pull it Straight Out By Hand. Be Careful When Replacing, Where this is Located there is Stamped (Sharp) Metal.